Serving all of Broward County — based in Sunrise, FL 📞 (786) 938-6090

Attic Insulation Company in Hollywood, FL

Hollywood has some of the oldest housing stock in Broward — charming mid-century homes with attics that haven't been touched since they were built. That's money leaking through your ceiling every summer.

Free attic inspection in Hollywood: we check your attic, show you photos and give you a written price the same day, with no obligation. See our Google reviews

Hollywood's Older Homes Need It Most

From Hollywood Lakes and the Hills to Emerald Hills and West Hollywood, thousands of homes here were built between the 1950s and 1970s. Insulation requirements back then were minimal — and whatever was installed has been settling and degrading for 50+ years. If your ceilings feel warm on summer afternoons and the AC never seems to catch up, your attic is almost certainly why.

  • Free attic inspection with photos — see exactly what's above your ceiling
  • Blown-in insulation topped up to R-30–R-38 — most homes done in 2–4 hours
  • Removal available for rodent-contaminated or water-damaged material
  • Owner on every job — one person responsible, from quote to final check
Book Your Free Hollywood Inspection

Attic Insulation Services in Hollywood

Hollywood's housing is older and smaller than most of Broward, so the jobs here are usually quick: compact, low-clearance attics that need a lot of insulation in a small space.

Blown-in insulation for low-clearance attics

1950s and 60s Hollywood homes often have attics you can barely crawl into. Blown-in insulation goes where batts can't, without anyone kneeling on the drywall.

Bringing near-bare attics up to R-38

Many Hollywood Lakes and Hollywood Hills originals have an inch or two left. A small attic means a full install is often done in two to three hours.

Removal of rodent-damaged insulation

Older homes near the Intracoastal and the parks see roof rats. Contaminated insulation is vacuumed out and replaced the same visit, after pest control seals the entry points.

Air sealing in older ceilings

Plaster-era ceilings and old light fixtures leak a lot of air. Sealing them before blowing is an add-on that matters more here than in newer homes.

The Best Attic Insulation for Hollywood Homes

In a low, compact Hollywood attic, the right insulation is the one you can actually install evenly. Batts need someone crawling over every joist bay and still leave gaps around wiring and old fixtures. Blown-in fiberglass fills those tight spaces from the hose, at a consistent depth, without stepping on the ceiling.

For historic homes in Hollywood Lakes, blown-in is also the least invasive upgrade a house can get. Nothing structural changes, nothing is visible, and the material simply sits on top of the ceiling, which matters if you care about the home's original character.

  • Our pick for most Hollywood homes: blown-in fiberglass to R-38 on the attic floor.
  • Very low clearance: blown-in is usually still possible. The inspection confirms it before you pay anything.
  • Old knob-and-tube wiring in the attic: that needs an electrician before any insulation goes over it. We'll tell you if we see it.

Comparing fiberglass, cellulose, batts and spray foam in more detail? See the South Florida insulation guide.

What Your Hollywood Inspection Looks Like

In Hollywood's older homes, the inspection is as much about what's in the attic as how deep the insulation is.

Example thermal camera scan of a ceiling showing a warm strip where attic heat is getting through

Example thermal scan: the warm strip is where heat is getting through the ceiling.

  • Thermal scan of every ceiling — small attics heat up fast under a low roofline, and the scan shows which rooms are taking the heat.
  • Access and clearance check — we confirm the hose can reach every bay and note anything that blocks it, like old ductwork or storage decking.
  • Wiring, rodents and depth — we look for old wiring, droppings and nesting, measure the depth, and give you one written price.

A recent Hollywood job: blown-in fiberglass at full depth with a depth marker in place, so the finished level can be checked at a glance. See more of our projects.

Blown-in fiberglass attic insulation with a depth marker in a Hollywood, FL attic Book Your Free Hollywood Inspection

Hollywood Neighborhoods We Serve

Hollywood Lakes, Hollywood Hills, Emerald Hills, West Hollywood, Boulevard Heights, and the streets around Young Circle and North Beach. Hollywood's 1950s–60s originals are some of Broward's most charming homes — and some of its emptiest attics. Homes of that era were often built with an inch or two of insulation, or none at all, and their compact attics heat up fast under a low roofline. The good news: smaller attics are quick jobs. Many Hollywood homes go from nearly-bare to a full R-30–R-38 blanket in two to three hours.

Also serving Fort Lauderdale next door, Pembroke Pines to the west, and all of Broward County.

Hollywood FAQ

Is the attic inspection in Hollywood really free?
Yes. The inspection is free with no obligation. We check your attic, take photos and give you a written price the same day, usually in about 20 minutes.
What does attic insulation cost in Hollywood?
Most Hollywood top-up jobs run $1,500–$3,000 depending on attic size and current insulation depth. Exact free quote after a quick attic check.
Our 1950s house has almost no attic clearance — can you still do it?
Usually yes. Blown-in insulation is exactly the right tool for tight, low-clearance attics — the hose reaches where a person can't. We'll confirm at the free inspection.
How fast can you come out?
We're based in Sunrise, about 25 minutes away — inspections are usually scheduled within a couple of days.
Our Hollywood Lakes house is historic — will the work damage anything?
No. Blown-in insulation is one of the least invasive upgrades a vintage home can get: everything happens through the attic hatch, nothing structural changes, and the material simply lies on top of the ceiling. Floors and walls are protected along the equipment path, and the house looks exactly the same when we leave — it just costs less to cool.
We hear our AC ducts are in the attic. Does insulation still help?
Even more so. Ducts running through a 130° attic gain heat before the air ever reaches your vents. A full-depth insulation layer drops the attic temperature around those ducts, so the cold air arrives colder. If we spot obvious duct problems during the inspection, we'll show you photos — that's an AC company's fix, and you'll want to know either way.
What’s the best attic insulation for Hollywood homes?
For Hollywood’s humid climate and mostly mid-century concrete-block homes, blown-in fiberglass on the attic floor is the best value: it doesn’t absorb moisture, doesn’t feed mold, fills the irregular framing older homes have, and reaches the R-30–R-38 South Florida needs at a fraction of spray foam’s cost. Full comparison in our South Florida insulation guide.

Old or Rodent-Damaged Insulation in Hollywood?

Blown-in attic insulation at full depth with a depth marker card visible

Full-depth blown-in with depth markers in place — how every job should be verifiable.

Many Hollywood attics we see still carry their original decades-old insulation — compressed, dusty, or contaminated by past rodent activity. If yours needs to come out before anything new goes in, our insulation removal & replacement service handles both in one visit: old material vacuumed out, attic cleaned, fresh blown-in installed the same day.

Hollywood: get your free attic inspection.

Call (786) 938-6090
Call NowBook Free Inspection