Serving all of Broward County — based in Sunrise, FL 📞 (786) 938-6090

Attic Insulation Company in Coral Springs, FL

Coral Springs was built out through the 70s, 80s and 90s — which means most of its attics are decades past their best. We top them back up to full strength in a single visit.

Free attic inspection in Coral Springs: we check your attic, show you photos and give you a written price the same day, with no obligation. See our Google reviews

Call (786) 938-6090 Book My FREE Attic Inspection

Decades of Settling Adds Up

Whether you're in Ramblewood, Coral Springs Country Club, Eagle Trace or Heron Bay, the story upstairs is usually the same: the insulation your home was built with has compressed, thinned, and drifted far below today's R-30–R-38 recommendation for South Florida. The result is an AC that runs longer every year and bedrooms that never quite cool down.

  • Free attic inspection with photos — see exactly what's above your ceiling
  • Blown-in insulation topped up to R-30–R-38 — most homes done in 2–4 hours
  • Removal available for rodent-contaminated or water-damaged material
  • Owner on every job — one person responsible, from quote to final check
Book Your Free Coral Springs Inspection

Attic Insulation Services in Coral Springs

Coral Springs attics are usually dry, accessible and simply under-filled, which makes them some of the most straightforward jobs we do. The exceptions are homes with rodent history or a past roof claim.

Blown-in top-up for 70s–90s homes

Ramblewood, Eagle Trace and the Country Club homes were built to older codes and have settled for decades. Topping up over the existing layer to R-38 is the most common Coral Springs job.

Insulation removal & replacement

For attics with rodent droppings or insulation flattened by a past leak. The old material is vacuumed out, the attic cleaned, and fresh insulation installed.

Attic air sealing

An add-on we recommend after removal, when gaps around lights, pipes and top plates are exposed.

Free thermal attic inspection

A thermal scan of your ceilings, a measured depth, photos and one straight price.

The Best Attic Insulation for Coral Springs Homes

Because most Coral Springs attics are dry and in good shape, the simplest answer is usually the right one: add blown-in fiberglass over what's already there until the attic reaches R-38. There's no need to pull out clean, dry insulation just because it's old.

The cases where we recommend more are specific: insulation matted by a roof replacement after a hurricane claim, or contaminated by rodents. Those sections come out first, and only those sections.

  • Our pick for most Coral Springs homes: a blown-in fiberglass top-up to R-38.
  • After a roof replacement: check the attic for debris and wet sections before topping up.
  • Two-story homes: the attic over the second floor is the priority. Between-floor insulation rarely pays.

Comparing fiberglass, cellulose, batts and spray foam in more detail? See the South Florida insulation guide.

What Your Coral Springs Inspection Looks Like

Blown-in attic insulation at full depth with a depth marker visible

Full-depth blown-in with a depth marker in place, the way every finished job should be verifiable.

  • Thermal scan from inside — with the AC running, warm patches on the ceiling show where attic heat is getting through. Upstairs bedrooms in two-story homes are where we usually find it.
  • Depth measured in the attic — a ruler at several spots, photographed, so you see the real number instead of a guess.
  • A written report and one price — what we found, what we recommend, and what it costs. If your attic is fine, the report says so.

A recent Coral Springs job: blown-in fiberglass brought up around the AC duct and between the trusses, so the duct sits in a full layer instead of on a thin one. See more of our projects.

Blown-in fiberglass attic insulation around an AC duct between trusses in Coral Springs, FL Book Your Free Coral Springs Inspection

Coral Springs Neighborhoods We Serve

Ramblewood, Coral Springs Country Club, Eagle Trace, Heron Bay, Maplewood, Forest Hills, Oakwood, and the established neighborhoods around University Drive. Coral Springs was master-planned and built out largely in the 1970s–90s, which makes its attics predictable in the best way: accessible, dry, and under-filled by modern standards. It's also one of the quickest cities for us to reach from Sunrise — usually 15–20 minutes up Sample Road or the Sawgrass.

Also serving Sunrise (our home base) and Plantation, plus all of Broward County.

Coral Springs FAQ

Is the attic inspection in Coral Springs really free?
Yes. The inspection is free with no obligation. We check your attic, take photos and give you a written price the same day, usually in about 20 minutes.
What does attic insulation cost in Coral Springs?
Most Coral Springs top-up jobs run $1,500–$3,000 depending on attic size and current insulation depth. Exact free quote after a quick attic check.
We had rats in the attic last year — should the old insulation come out?
If they nested in it, yes — droppings and urine shouldn't be sealed under fresh insulation. We remove the contaminated material, sanitize, and install new insulation, usually all in one visit.
How fast can you come out?
We're based in Sunrise, about 15 minutes away — Coral Springs is one of our fastest areas to schedule.
Two-story Coral Springs home — do you insulate between floors too?
The attic above the second floor is the priority — that's where the Florida sun does its damage, and it's why upstairs bedrooms run hot. The space between floors isn't exposed to attic heat and rarely justifies work. We'll tell you straight if your money is better spent elsewhere.
Our house had a new roof after a hurricane claim. Is the insulation affected?
Worth checking — roof replacements can leave debris in the attic, and if the old roof leaked before it was replaced, sections of insulation may have gotten wet and matted down. The free inspection photographs all of it, and if only part of the attic is compromised, we can spot-replace that section rather than everything.
Do I need HOA approval for attic insulation in Coral Springs?
Attic insulation is interior work with nothing visible from the street, so most Coral Springs HOAs don't require architectural approval for it. If your community has strict rules about contractors or work hours, check with your HOA, and we'll schedule around them.
Do you offer attic insulation removal in Coral Springs?
Yes. If your insulation is contaminated by rodents, water-damaged or badly matted, we vacuum it out, clean the attic and install new insulation, usually in one visit. If it's just thin but clean, a top-up over it costs much less and works just as well.

Coral Springs: get your free attic inspection.

Call (786) 938-6090
Call NowBook Free Inspection